13
2.
Secure the blade holders to the top hub of the
motor assembly using the 1/4˝-20 screws. (Figure 2)
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
Figure 2
Figure 1
Blade Holder
1/4
˝
-20 Screws
(2 per assembly)
WARNING
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between the rotating blades.
How to Assemble Your Ceiling Fan Blades (Continued)
How to Assemble Your Light Kit
1/4˝-20 Screws
X 6
HARDWARE USED:
Motor Assembly
Screws (3)
Figure 2
2.
Connect the 2 single pin connectors from the light
kit assembly to the 2 single pin connectors from the
motor assembly. (Figure 2)
Light Kit Assembly
Motor Assembly
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
1.
Remove the three screws in the adaptor plate at
the bottom of the motor assembly. Retain the screws
for Step 3. (Figure 1)
