F&U FLA4321UH, Инструкция

Страница: 19 / 86

English - 18 -
Date & Time:
Set the date and time options of your
TV. You can set your TV to automatically update
the time and date data over the network or over the
broadcasts. Set corresponding to your environment
and preference. Disable by setting as Off
if you want
to manually change the date or time. Then set date,
time, time zone and hour format options.
Timer
Power On Time Type:
Set your TV to turn on by
itself. Set this option as
On or Once to enable a
power on timer to be set, set as Off
to disable. If
set as Once
the TV will turn on only once at the
defined time in
Auto Power On Time
option below.
Auto Power On Time: Available if the Power On
Time Type is enabled. Set the desired time for your
TV to come on from standby using the directional
buttons and press
OK to save the new set time.
Power Off Time Type: Set your TV to turn off by
itself. Set this option as
On or Once to enable a
power off timer to be set, set as Off
to disable. If
set as Once
the TV will turn off only once at the
defined time in Auto Power Off Time option below.
Auto Power Off Time:
Available if the
Power Off
Time Type is enabled. Set the desired time for your
TV to go to standby using the directional buttons and
press
OK to save the new set time.
Language:
Set your language preference.
Keyboard:
Select your keyboard type and manage
keyboard settings.
Inputs:
Show or hide an input terminal, change the
label for an input terminal, and configure the options
for HDMI CEC (Consumer Electronic Control) function
and display the CEC device list.
Power
Sleep Timer:
Define a time after which you want
your TV to enter sleep mode automatically. Set as
Off
to disable.
Picture Off: Select this option and press
OK to turn
the screen off. Press a button on the remote to turn
the screen on again. Note that you can not turn the
screen on via the
/-
,
Mute and Standby
buttons. These buttons will function normally.
No Signal Auto Power Off:
Set the behaviour of
the TV, when no signal is detected from the currently
set input source. Define a time after which you want
your TV to turn itself off or set as Off
to disable.
Auto Sleep:
Define an idle time after which you
want your TV to enter sleep mode automatically.
4
Hours
,
6 Hours and 8 Hours
options are available.
Set as Never to disable.
Picture
Picture Mode:
Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options:
Standard
,
Vivid
,
Sport
,
Movie and Game .
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Bright
,
Dolby Vision Dark and Dolby Vi-
sion Vivid picture mode options will be available instead
of other picture modes.
Backlight
,
Brightness
,
Contrast
,
Colour
,
HUE
,
Sharpness
settings will be adjusted according to
the selected picture mode.
Dolby Vision Notification: Set your notification ap
-
pearance preference for Dolby Vision content. When
turned
on, Dolby Vision logo will be displayed on
the screen when Dolby Vision content is detected.
Auto Backlight:
Set your auto backlight preference.
Off ,
Low
,
Middle and Eco
options will be available.
Set as
Off
to disable.
Backlight:
Adjust the backlight level of the screen
manually. This item will not be available if the Auto
Backlight is not set as
Off
.
Brightness:
Adjust the brightness value of the
screen.
Contrast:
Adjust the contrast value of the screen.
Colour:
Adjust the colour saturation value of the
screen.
HUE:
Adjust the hue value of the screen.
Sharpness:
Adjust the sharpness value for the
objects displayed on the screen.
Gamma:
Set your gamma preference.
Dark
,
Middle
and Bright
options will be available.
Colour Temperature:
Set your colour temperature
preference.
User
,
Cool
,
Standard and Warm
op
-
tions will be available. You can adjust red, green and
blue gain values manually. If one of these values
is changed manually,
Colour Temperature
option
will be changed to User
, if not already set as
User .
Display Mode:
Set the aspect ratio of the screen.
Select one of the predefined options according to
your preference.
HDR:
Turn the HDR function on or off.
This item will
be available if HDR content is detected.
Advanced Video
DNR:
Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signals.
Set your DNR preference as
Low
,
Medi-
um
,
Strong
,
Auto
or turn it off by setting as Off
.
MPEG NR:
MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground.
Set your MPEG NR preference as
Low
,
Medium
,
Strong
or turn it off by setting as Off
.
Max Vivid:
Manipulates contrast and colour
perception, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set
as On to enable.