Lumina 47
General introduction
1
1.
General introduction
This manual has been compiled with the utmost care. If, however, you should discover an error, please inform
Fancom B.V..
1.1
How to use this manual
The following symbols are used in this manual:
Tips and suggestions.
Note providing recommendations and additional information.
Warning indicating damage to the product if you do not follow procedures carefully.
Warning indicating danger to humans or animals.
Electrical shock hazard. Danger to humans and animals.
Example of a practical application of the described functionality.
Calculation example.
Describes the key combinations for arriving at a particular screen.
Decimals
The control computer and this manual use a decimal point in values. For example: a weight is shown as 1.5 kg (not
as 1,5 kg).
1.2
Fancom helpdesk
For any questions and support, please contact the local Fancom Sales & Service Center.
1.3
F-Central FarmManager™
Virtually all Fancom equipment can be controlled and managed from a central location. This requires the F-Central
FarmManager software package and a communication module. The screens in the control computers are also used
in F-Central FarmManager. This means you can start working immediately.
1.4
Safety instructions and warnings
Read the safety instructions, regulations and conditions carefully before installing and/or using the system. Installing
the device and remedying any malfunctions must only be carried out by an authorized installer, according to the
prevailing regulations. The guarantee will not apply if this product is built into a switch box in any way other than that
indicated by Fancom.
The installation, of which this product is a part, must be equipped with a reliable, independent alarm
system, for example, a minimum/maximum thermostat. We advise you to test the alarm system every day
for proper functioning.
