Lumina 47
User
8
3.2.2
Set up flock
Set up the animals as soon as they enter the house. If control is based on the curve, the control computer will use
the settings from the curve. If not enter these settings manually.
If there are no animals present, the control computer will set this number to 0. The control and registration
data will not be saved. Note this data if you still need it.
Overview
Set up
Curve day
Setting of the curve day number:
•
Day number 0: do not control with the curve
All control data must be entered manually. The day number stays 0 during the
lifecycle of the animals.
•
Day number 1 or higher: control with the curve
The control computer increases this number by 1 every day at midnight.
At set up you usually start with day 1. If a higher day number is chosen, control will start
further along in the curve.
Nbr of animals
Setting of the number of animals that have been set up.
Date
Setting of the date. The control computer only uses the
Date
for data registration. The
control computer starts control immediately after the animals have been set up, even if
a past or future date has been entered.
