Gnd
3
g
2.
Possibilities
Set the type of control required using dipswitch 6, 7 and 8.
2.1
ProFlow/NatuFlow
The ITM-iF controls the ventilation in a section by measuring the air flow (DSR feedback signal) and by controlling
the I-fan and the valve of the ATM unit.
The ITM-iF can be used as:
1. Energy saving mechanical ventilation system (no possibility to switch to natural ventilation)
2. Energy saving mechanical. & natural ventilation system (possible to switch to natural ventilation)
3. Traditional mechanical ventilation system (no possibility to switch to natural ventilation, fan runs at higher
speed)
4. Mechanical several units in same room (no possibility to switch to natural ventilation)
2.2
Remote I/O-module
The climate controller controls the ventilation in the section by directly controlling the outputs of the ITM-iF.
