Fancom INTELLITEK, Руководство пользователя

Страница: 12 / 22

IntelliTek Configuring basic settings
9
Example: The user normally moves the entire group of sows 5 days after inseminating to an empty
section of the gestation area. After putting a group of sows into an empty section, he can adjust the
stadium-day of the sows of this section at the TouchTek Box. The stadium-day will increase day by day
until he is removing all sows of this section to the farrowing area. At that point of time the stadium-day
of this section will be automatically reset to this “default” stadium-day. This default stadium-day will
remain the same until the first sow again mo
ved to this section, then the “insemination-day” is frozen
and the stadium-day is again increasing day by day.
The daily feed amount of all sows at the IntelliTek section will be calculated at feed start by the assigned feed-
profile of the sow. Usually the user is assigning the appropriate feed-profile to all sows at the PC or MILAN-Touch
Handheld. However, if the user doesn’t want to set individually feed-profiles to the sows he can configure the
T
ouchTek Box as “section-wide feed-profile” to easily choose the wanted feed-profile at the TouchTek Box what is
valid for all sows within this section.
In order to provide all sows with their specific individual feed requirements, the configuration “section-
wide feed-
profiles” is only recommended if the user makes sure that the sows within this section are
almost equal regarding their feeding needs!
Remember that even all sows within this section have the same feed-profile the user can adapt the
daily feed amount for individual sows by assigning a “condition” (%-feed deviation) to specific sows.
This setting has influence on the handling of the IntelliTek system and should be set carefully.
Click settings , choose Feedprofile and click the button at the Header
“individual ”; the following screen appears:
1. At this screen you can define the default feed-profil that will be assigned to an unknown sow.
The feed-profile of a sow will remain always the same as long the user is changing the feed-profile manually at
the PC or Milan Touch Handheld. However, if an IntelliTek station identifies an unknown transponder (sow) the
system will create automatically a new sow to the system
– in that case this default feed-profile will be assigned to
this new created sow.