Fancom FaroTek, Руководство по установке

Страница: 36 / 37

FaroTek Appendix: Instructions for connecting cable with shielding
33
5. Remove the plastic foil and the ribbons and cut the wires to length.
6. The length of the wires depends on the distance between the shield clamps and the "connector base".
7. Push the end of the wire into the connector as far as the stop. You must make sure that the right color of wire
is inserted in the right connector position.
8. Press to close the connector, so that the wire is securely attached to the connector.
9. Now make sure that all wires are in the right locations (colors) and that every wire is secure.
10. You can use a small screwdriver to open a connector that has been pressed closed. This enables any
mistakes to be corrected.