INSTALLATION AND ASSEMBLY
CAUTION: Before installing the fan make sure you have turned OFF the electricity supply.
SELECTING A LOCATION:
1. Choose a location for mounting the fan where the blades will have at least 2.1 metres of
clearance from the floor.
2. Make sure that the installation site will not allow the rotating fan blades to come into contact
with any object and that there is a minimum clearance of 150mm (6”) from the blade tip to
the wall or ceiling. Please note that the bigger this clearance is the better the airflow from
your fan will be.
3. DO NOT
use outdoors unless installed in an enclosed alfresco area. In this case fan should
be installed at least 1.5m away from edge of eave/roof. Installing the fan in a position where
it could be exposed to water or moisture is dangerous.
4. If the location you have chosen does not have a suitable support beam capable of
supporting 45Kg, install a brace 2” x 4” between the ceiling joists as a support medium.
5. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of
carrying a load of at least 45Kg, with the two long fixing screws provided. Ensure that at
least 30mm of the screw is threaded into the support.
NB: The fixing screws included are designed for use when ceiling fan is secured onto
timber joists. For all other surfaces, additional and suitable fixing screws for that surface
will need to be purchased.
4
ELECTRICAL CONNECTIONS
:
• Ensure the power is off when installing this fan.
• Connect the Live (L), Neutral (N) and Earth ( ) according to the markings on the
Terminal Block.
For your convenience, and to assist in easy installation & cleaning, your ceiling fan is
connected with Brilliant’s easy connect system. Simply connect the male and female
couplings, and then ensure excess wiring is retained inside the upper canopy.
