19
Now connect your new Quick Release system in the same way with the match-
ing cables (the short QR cable connects to the long wheel base cable, and the
long QR cable connects to the short wheel base cable).
Twist the cable by turning the Quick Release five times to avoid damaging the
cables inside the wheel base.
NOTE:
The wheel base shaft has a step where the inner diameter decreas-
es. It’s important that the connectors clear this step to avoid damaging
the cables during reassembly. If necessary, you can try to push the con-
nectors carefully with a flat tool to pass the step.
Turn the locking ring counter-clockwise until it touches the rubber gasket before
you insert the new steering axle.
Push the new steering axle carefully into the wheel base until you feel resist-
ance from the step in the shaft.
Put on the clamp ring and tighten the bolts evenly.
NOTE:
When re-attaching the QR clamp to the wheel base shaft, ensure
that both gaps are aligned, as marked by the red line in the image below:
NOTE:
You will have to re-calibrate the wheel centre after making any ad-
justments to the Quick Release.
Содержание PODIUM F1
Страница 1: ...www fanatec com Manual EN...
