FANATEC PODIUM F1, Руководство пользователя

Страница: 21 / 53

21
6.6.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters to the Podium
Racing Wheel F1® (e.g. the ClubSport Shifter SQ in SQ mode or the ClubSport
Static Shifter Paddles.) Note: Sequential shifters connected to this port can
be mapped identically to the shifter paddles on the ClubSport Steering Wheel
F1® PS4™ or any other Fanatec
®
steering wheels by PC* driver settings (see
chapter ‘PC* driver’ of this user manual).
Attention: H-pattern shifters will not work on SHIFTER2 port!
6.6.4 PEDAL
The PEDAL port is used to connect pedals to the Podium Racing Wheel F1®
(e.g. the ClubSport V3 and Clubsport V3 inverted).
6.6.5 HANDBRAKE
The HANDBRAKE port is used to connect the ClubSport Handbrake V1.5 to
the Podium Racing Wheel F1®.
6.6.6 POWER
The POWER connector is used to connect the power supply to the Podium
Racing Wheel F1®.
6.6.7 DATA
The DATA port is to be used for future accessories such as LED displays.
6.6.8 E-STOP
The E-STOP port is for use with the optional Podium Kill Switch.
6.6.9 TORQUE KEY
The TORQUE KEY port is for use with the included Torque Key.
6.6.10 CAN
The CAN port is to be used for future CAN bus support.
IMPORTANT:
Please use only the power supply and power cord that
came with your Podium Racing Wheel F1®. Replacements may only be
issued from an authorised repair centre. See ‘Electrical Safety’ in Chapter
1 ‘General’ for more details!
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe