8
equipment during hoisting.
(5)The capacity of hoisting tools should be more than total weight of the equipment.
(6)When the equipment is stored temporarily, please place the equipment at level and
keep a constant temperature and indoors clean.
(7) For transportation, it is not allowed to damage the equipment by packing. It should be
reported to the manager immediately in case of any machine damage and missing parts
during transportation.
(8)In installation, enough clearance should be allowed for future maintenance and
replacement of the equipment.
(9)Prior to installation, all machine parts must be kept in their original package. The
machine parts and packing boxes should be properly coveredand stored in places
sheltered from rain, sunlight and damp.
(10)The cover plate, protection hood or guard are usually installed and delivered together
with the machine. They can only be disassembled with tools. And the machines required
with the protection devices can never be put into work until such devices have been
properly installed.
1.6 Safety instructions in operation, inspection and maintenance
(1)The operation, inspection, repair and maintenance of the equipment shall be carried
out only by the trained technical personnel according to applicable specifications
provided together with the equipment. Electric installation shall be performed only by
professionals according to relevant electric safety standards.
(2)For maintenance or repairing, the power must be cut off so as to prevent the motor
from unauthorized start.
(3)For operation, installation, repair and maintenance, please be sure to turn off and lock
the main power switch, and place the signboard at the workshop gateway, in front of the
electric control cabinet in the control room and near the extruder respectively, so as to
prevent the motor from accidental tripping.
(4) In operation, a special attention shall be paid to the positions with attached safety
signs.
(5)Do not operate when the safety protection device is off and access door is open. It is
prohibited to open the access door until the machine comes to full stop.
(6)If any trouble occurs in the access door or safety protection device, please repair or
replace them at once.
(7)The safety protection devices can never be dismounted, covered or bypassed at
liberty. They can never be opened until the machine has completely stopped. And the
machine can only be started when these safety protection devices are in good order.
(8)The feeding bin gate, feeder gate, conditioner gate, guard shield, cutting cart guard
shield and others may not be opened or detached, and it is not allowed to remove or
