FAMILY INADA Nest HCP-S999A, Руководство по эксплуатации

Страница: 25 / 104

[PRESE
T PR
OGR
AMS]
22
❺
Program completed.
Automatic Raise
The rollers return to their storage position (upper part of the
seat back). Then the power to the remote control is shut off.
However, the reclining of the seat back and the up or down
adjustment of the leg rest can still be operated. The automatic seat
reclining raise operation
when the session is
completed can be set ON/
OFF. A green lamp turns the light off
while it is canceled.
Air Massage Intensity Adjustment and Cancelation
The air massage intensity can be adjusted.
Each time the air intensity button is pressed, the intensity changes in the order of Low, Medium and High . (The
default setting when the program starts is Medium.)
Max
Mode
In the same way, the intensity can be changed in the order of Low, Medium and High even when Max Intensity mode
is ON.
(The default setting when Max Intensity mode starts is High.)
The arm air massage can be turned ON/OFF.
Set the arm air massage operation during the program.
Each time the button is pressed, the setting switches between
ON/OFF .
The lower back/seat air massage can be turned ON/OFF.
Set the seat air massage operation during the program.
Each time the button is pressed, the setting switches between
ON/OFF .
The leg air massage can be turned ON/OFF.
Set the leg air massage operation during the program.
Each time the button is pressed, the setting switches between
ON/OFF .
Changing Programs
Before the program in progress finishes, you can change it to another program. After a total duration of 30 minutes,
the program in progress stops even if not completed.
Switching from One Preset Program in Progress to Another
When one preset program button is pressed while another preset program is in progress, the rollers return to the
detected shoulder positions, and the shoulder positions are rechecked before starting the massage again. The
shoulder positions can be adjusted while the shoulder positions are being rechecked.
Switching from a Preset Program to Manual Selection Mode
When one of the buttons for manual selection mode located inside the panel of the remote control is pressed while a
preset program is in progress, the preset program immediately stops, and the selected operation starts. If an operation
that detects the shoulder positions is selected, the shoulder positions are rechecked before starting the operation.
(To select an air massage, first select an operation such as kneading or tapping, or press the button to stop the
preset program in progress before making the selection.)
Stopping in the Middle of a Massage
To stop mid-massage, press the button. The rollers return to their storage positions and stop.
In an emergency
or
if there is some malfunction
during the operation of the chair, press the
EMERGENCY STOP button. The rollers will stop immediately. After confirming safety, press the button. The rollers
return to their storage positions and stop.
Caution
●
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If this solution does
not work, stop operation immediately and contact the “Repair Service Center“ (see back page) for assistance.
→
May result in injury if you continue use with high stimulation under such circumstances.
●
Do not place your hands or feet into the roller tracks, into the space between the seat back and the seat or into the moving parts.
Do not sit wearing hard objects, such as hair accessories, necklace, watch, bracelet, or ring.
●
If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
●
Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for an area-specific massage of
any particular part of the body.
→
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired effect, or even injury.
The total amount of time for a daily massage should be limited to about 30 minutes.
When a preset program is selected, the reclining seat back may recline automatically. In addition, during some
programs the reclining seat back moves automatically, so before using the chair, make sure that there is no person or
obstruction behind it. Also, do not let other people approach the chair during use.