27
ENGL
IS
H
ASSEMBLY INSTRUCTION
WARNING! Take great care
when doing this as the guard has
a very sharp cutting edge.
Position motor head/axle as shown in
(FIG4), with screw fixing hole at the top
centre. (remove pre fitted screw).
Position guard with inner side, ie.
moulding facing you as shown in (FIG5).
Lower the guard over the motor head/
axle (see FIG6) and align slots as shown
in (FIG7) (note position of the tab).
Align marks on head of the unit and
the guard, turn the guard in a clockwise
direction. see (FIG7).
01
02
03
04
Remove the screw
located before fixing
the protection.
FIG 4
Guide
FIG 5
FIG 6
Put dow as shown
untill the position.
DANGER:
Sharp blade!
BOX CONTENT
- 1 Grass Trimmer
- 1 Instruction manual
- 1 Warranty certificate
- 1 List of technical assistance
- 1 Cutting edge support with 2 screws and 2 washers
- 1 Safeguard cover
- 1 Safeguard cover screw
- 1 storage hook (self service) with 4 screws