11
WARRANTY AND MANUFACTURER LIABILITY
Correct functioning and full compliance to the intended service depends on the
correct application of the instructions contained in this manual.
The manufacturer waives any liability, either direct or indirect; deriving from:
1. failure to observe the instructions contained herein;
2. entrusting the machine to non-trained personnel;
3. failure to use this machine in according to the norms currently in force in the
country of installation;
4. unauthorized alterations or repair;
5. use of non original accessories and spare parts;
6. acts of God.
INSTALLATION AND FUNCTIONING TESTS
Open the carton and make sure that all components are intact.
Lift the machine according to the instructions and place it in its selected setting for
installation.
Place the machine on a suitably plane, smooth and dry surface sufficiently strong to
support the machine weight.
Install near an outlet complying to EU and derived from an electrical system made to
current regulations.
Before completing the connections, check that the mains correspond to the data
shown on the plate.
THREE-PHASE CONNECTION
Start the machine for just a few seconds and check that the planetary turns in the
right direction (see arrow on the machine). In the case where the rotation is not
correct, disconnect power and exchange two of the three phase wires in the plug.
