Fält Communications 2016 ©
162187 Manual Fältcom ECII® Flex V024D 2016-02-23
Page 25 of 41
From keypad:
From phone:
# 330 #
6.15.2 Battery alarm from a GSM Gateway (art. 2236)
Similar to 6.15.1 above the GSM Gateway (art. 2236) has battery back-up power incase of
power failure in the building. When a battery alarm is generated in the GSM Gateway it will
change the dial tone for the Fältcom ECII® Flex to detect. Please view the GSM Gateway
manual for specifications. When the battery is replaced the Fältcom ECII® Flex will send a
battery reset alarm after the new battery has been tested, the same alarm types will be used
for battery and battery reset alarms as above. Battery alarm is default deactivated in the Fält-
com ECII® Flex.
Activate battery and battery reset alarms from GSM Gateway:
From keypad:
From phone:
340 #
To return to default setting, disabling battery and battery reset alarms from GSM Gateway:
From keypad:
From phone:
# 340 #
6.16 Simplified acknowledgement
Using this function it is possible to simplify the alarm reception procedure when using a
standard telephone as an alarm receiver. When the function is active, all numeric buttons (0-
9) on the phone will acknowledge the alarm and the
button disconnects the alarm call.
Each time any of the buttons 0-9 is pressed on the telephone the disconnect time-out is reset
to 180 seconds. Only duplex mode is available.
The function is activated with:
From keypad:
From phone:
320 #
Return to default acknowledgment:
From keypad:
From phone:
# 320 #
Note: If a speech message is used; press any key to stop the message.
