FALMEC Zenith 120, Инструкция пользователя

Страница: 14 / 64

14
SAFETY INSTRUCTIONS
AND WARNINGS
Installation operations are to be carried
out by skilled and qualified installers in ac-
cordance with the instructions in this booklet and
in compliance with the regulations in force.
DO NOT use the hood if the power supply cable
or other components are damaged:
disconnect
the hood from the electrical power supply and con-
tact the Dealer or an authorised Servicing Dealer for
repairs.
Do not modify the electrical, mechanical or func-
tional structure of the equipment.
Do not personally try to carry out repairs or re-
placements. Interventions carried out by incom-
petent and unauthorised persons can cause seri-
ous damage to the unit or physical and personal
harm, not covered by the Manufacturer's war-
ranty.
WARNINGS FOR THE INSTALLER
TECHNICAL SAFETY
Before installing the hood, check the integ-
rity and function of each part. Should
anomalies be noted, do not proceed with installa-
tion and contact the Dealer.
Do NOT install the hood if an aesthetic (or cos-
metic) defect has been detected. Put it back into
its original package and contact the dealer. No
claim can be made for aesthetic (or cosmetic) de-
fects once it has been installed.
During installation, always use personal protective
equipment (e.g.: Safety shoes) and adopt prudent
and proper conduct. The installation kit (screws and
plugs) supplied with the hood is only to be used on
masonry walls: in case of installation on walls of a dif-
ferent material, assess other installation options keep-
ing in mind the type of wall surface and the weight
of the hood (indicated on page 2). Keep in mind that
installations with different types of fastening systems
from those supplied, or which are not compliant, can
cause electrical and mechanical seal danger. Do not
install the hood outdoors and do not expose it to at-
mospheric elements (rain, wind, etc.).
ELECTRICAL SAFETY
The electrical system to which the hood is
to be connected must be in accordance
with local standards and supplied with earthed
connection in compliance with safety regulations
in the country of use. It must also comply with
European standards regarding radio antistatic
properties.
Before installing the hood, check that the electrical
mains power supply corresponds with what is repor-
ted on the identification plate located inside the hood.
The socket used to connect the installed equipment
to the electrical power supply must be within reach:
otherwise, install a mains switch to disconnect the
hood when required. Any changes to the electrical
system must be carried out by a qualified electrician.
The maximum length of the flue fastening screws
(supplied by the manufacturer) must be 13 mm. Use
of non-compliant screws with these instructions can
lead to danger of an electrical nature.
Do not try to solve the problem yourself in the event
of equipment malfunction, but contact the Dealer or
an authorised Servicing Department for repairs.
When installing the hood, disconnect the
equipment by removing the plug or switch-
ing off the main switch.
FUMES DISCHARGE SAFETY
Do no connect the equipment to discharge
pipes of fumes produced from combustion
(for example boilers, fireplaces, etc.).
Before installing the hood, ensure that all standards in
force regarding discharge of air out of the room have
been complied with.
USER WARNINGS
These warnings have been drawn up for
your personal safety and those of others.
You are therefore kindly asked to read the book-
let carefully in its entirety before using the or
cleaning the equipment. The Manufacturer de-
clines all responsibility for any damage caused
directly, or indirectly, to persons, things and pets
as a consequence of failing to comply with the
safety warnings indicated in this booklet. It is im-
perative that this instructions booklet is kept to-
gether with the equipment for any future con-
sultation.
If the equipment is sold or transferred to another per-
son, make sure that the booklet is also supplied so that
the new user can be made aware of the hood's oper-
ation and relative warnings. After the stainless steel
hood has been installed, it will need to be cleaned
to remove any residues remaining from the protec-
tion adhesive as well as any grease and oil stains
which, if not removed, can cause irreversible damage
to the hood surface. To properly clean the unit, the
manufacturer recommends using the supplied moist
wipes, which are also available sold separately.
Insist on original spare parts.