geocaching
Before using the geocaching function, you must
transfer
geocaches to your device (e.g.
from the internet portal Geocaching.com).
Tap in the main menu on „Geocaching“ and select „Search for geocache“.
You must first stipulate a
search centre
around which geocaches are to be searched for.
This may for example be your current location or a POI.
If you have transferred geocaches around your current search point to the device, they are
displayed in a list sorted according
to distance
.
Briefly tap twice on the geocache you want to call up the
detailed view
. There you will be
shown information about the cache and its description. You can have the geocache or the
waypoints displayed on the map or under
„options“
add waypoints or comments or
display the instructions. Start the cache by clicking on the „OK tick“. Once you arrive at the
cache, here you are shown an action button via which you can perform further actions (e.g.
logging).
You can find
further information
about geocaching and operation in the detailed user manual which is available for you to down-
load in the „Service“ section at
http://www.falk-outdoor.com/en/
bearing coMpaSS
After calculating a route to a geocache or during
navigation, you can access the main menu item
compass
to display your full screen compass
and various information which, in addition to
delivering precise routing to the cache, helps you to
maintain your bearings.
Arrow which points towards the destination, the
geocache
Distance to destination or to geocache
Direction to destination or to geocache
Name or coordinate of the destination or the
geocache
If the destination is a geocache, when you reach
your destination you receive a message and various
action buttons for logging the cache
or receiving detailed information.
note:
If the compass needs to be calibrated, there is a corresponding request >
please calibrate
. Please follow the instructions for
calibrating the compass.
35
34
