11
12
SETUP
SETUP
FSC750/FSC850 QUICK START GUIDE
FSC750/FSC850 QUICK START GUIDE
( If the blue LED is blinking rapidly (See table
bottom at page 2), it indicates that the camera
setup has taken longer than 4 mins.
If the setting is failed,
please find below solution.
9. Click on
[Start]
10. After the wifi is connected, it will go back
to below interface automatically. It will show
online. And just
click on the image
to view
live video.
Please unplug the camera and plug it in again,
wait around
90 seconds
, after it is initialized,
you will see both red and blue lights are solid.
(This means the camera is connected to
your wifi) Then please go back to home page
and follow the steps in
Page 5
to add the
camera to your Faleemi App and
no need to set
up wifi again.
3.
If you still can't add it to your Faleemi APP,
please follow the guide in
Page 22 [5. How to
restore to factory default?]
to
reset your
camera
and follow the steps since
Page 7
to do
the settings again.
1.
Please check if your WiFi password is correct
and re-configure it again.
2.
If the wifi password is correct, it always lets
you try again.
This is because for some routers,
you may not hear double beep after the WiFi
connection is succeeded.
If the setting is failed, please find
below solution or contact us by
Email:
Skype:
Phone:
213 293 3560
EST: 6am~11am, 8pm-11pm
PST: 6am~8am, 5pm-12pm
When you call us, please wait some more
When you call us, please wait some more
moment until it gets through.
moment until it gets through.
You will see it shows the camera
online
Note: Please click on "Start" button. Your
Note: Please click on "Start" button. Your
phone will make a loud sound to
phone will make a loud sound to
transmit the data to the camera. When
transmit the data to the camera. When
the camera receives the wifi signal, it will
the camera receives the wifi signal, it will
sound with 2 beeps.
sound with 2 beeps.
