29
Australia
This shows the single-phase connection. For 3 phase
connection the 3-pronged links can be removed and
the links underneath used to configure the connections
as required.
These appliances are of type X with regard to
protection against over heating of the surrounding
surfaces.
Fixed Wiring.
For connection to fixed wiring i.e. flexible conduit,
remove the electrical terminal cover box on the back
panel. Remove two screws and blanking plate from the
bottom flange of the cover box, so as to allow the
conduit through.
Fix conduit to conduit mounting bracket on the back
panel. Connect mains cable to correct terminals for
your electrical supply type. Check that the links are
correctly fitted and the terminal screws are tight.
Replace electric terminal cover box making sure that
the conduit is clear of the bottom flange.
Current Operated Earth Leakage
Breakers
Where the installation is protected by a 30 milliamp
sensitivity residual current device (RCD), the combined
use of your cooker and other domestic appliances may
occasionally cause nuisance tripping. In these
instances the cooker circuit may need to be protected
by fitting 100mA device. This work should be carried
out by a qualified electrician.
Hotplate check
Check each burner in turn. Push in tap and turn to the
large flame symbol ( ). Press ignition switch on facia
panel.
Grill
Open the grill compartment door. Turn on the grill
control and check that the grill heats up.
Oven check
The clock must be set to the time of day before the
ovens will work.
Press and hold as above.
At the same time, press - or + until the correct time
shows.
Don’t forget it’s a 24 hour clock.
If you make a mistake or press the wrong button, turn
off the power supply for a minute or two and start
again.
Turn on the oven and check that the oven fan starts to
turn and that the oven starts to heat up. Turn off the
oven.
Fitting the plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central
screw. Twist and fit each end keyhole over their
respective screws. Tighten the fixing screws.
Содержание Toledo 90 Dual Fuel
Страница 1: ...PROFESSIONAL 90 Dual Fuel Falcon 90 Dual Fuel Users Guide and Installation Instructions U1 237 01 ...
Страница 37: ...37 Australia ...
Страница 39: ...39 Australia ...
Страница 40: ......