8
OPERATOR WARNINGS
(CONTINUED)
Dump Trailers Continued
WARNING: LEAVING OUTRIGGERS DOWN WHEN THE TRAILER IS MOVING CAN
CAUSE THE TRAILER TO FLIP AND CAUSE SERIOUS INJURIES OR DEATH.
CAUTION: STAND BACK 10 FEET FROM PATCHER ANYTIME THE DUMP BOX
HOPPER IS IN MOTION.
CAUTION: ALWAYS USE THE CYLINDER GUARD (STORED ON THE HINGED SIDE
OF THE HYDRAULIC PUMP STORAGE TOOLBOX) WHEN THE DUMP BOX HOPPER
IS IN THE RAISED POSITION AND REMOVE/REPLACE BEFORE LOWERING.
CAUTION: BEFORE THE DUMP BOX HOPPER IS RAISED, LOWER BOTH
OUTRIGGERS AND INSERT PIN INTO POSITION SUCH THAT THE BASE OF THE
OUTRIGGER IS AS CLOSE TO THE GROUND AS POSSIBLE. SHOULD THE
PATCHER ACCIDENTALLY UNCOUPLE FROM THE TOW VEHICLE, THE
OUTRIGGERS WILL PREVENT THE PATCHER FROM TIPPING BACKWARDS.
CAUTION: NEVER RAISE DUMP BOX WITH TOP DOORS OPEN.
NOTICE: PROTECT THE REMOTE HOPPER CONTROL FROM BEING DAMAGED AT
ALL TIMES. IF CONTROLLER IS EVER DAMAGED, REPAIR OR REPLACE BY AN
AUTHORIZED SERVICE TECHNICIAN. DO NOT ALLOW CONTROLLER CORD TO
GET PINCHED WHEN DUMP BOX LOWERS.
Slip-In Units
DANGER: STAND BACK WHILE CONFIRMING THAT SLIP-IN PATCHER IS SECURED
IN DUMP BOX. IF NOT SECURED PROPERLY, PATCHER COULD FALL OUT AND
CAUSE SERIOUS INJURY OR DEATH.
WARNING: TO AVOID SERIOUS INJURY, ENSURE THAT ONLY TRAINED
PERSONNEL LOAD AND SECURE A SLIP-IN UNIT TO THE TOWING VEHICLE PER
OWNER PROCEDURES.
WARNING: REMOVE ALL ASPHALT FROM PATCHER BEFORE LOADING OR
UNLOADING A SLIP-IN UNIT.
WARNING: ENSURE LOADING/UNLOADING EQUIPMENT (I.E. FORKTRCK) HAS
CAPACITY TO HANDLE THE WEIGHT OF THE PATCHER BEFORE MOVING.
