Falcon Professional+ 100FX Dual Fuel, Руководство пользователя и инструкции по установке

Страница: 43 / 48

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
39
A
Top Element
Open the left-hand oven door and undo the fixings that
secure the heat shield. Remove the top element bracket
fixings and withdraw the element.
Replace the element and reassemble parts in reverse
order. Check that the oven operates satisfactorily.
4.5 To Replace the Right-hand Oven Bottom Element
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Bottom Element
Before replacing the bottom element it is necessary to
remove the cover plate.
Remove the side supports (see Removing the Right-
hand Oven Shelf Supports on
page 20
).
Remove the cover plate at the bottom of the oven by
unscrewing the 2 fixing screws at the back of the oven
(
Fig. 11.7 ).
Lift the cover plate out using the lip at the back, and
carefully lift up and pull forward.
Remove the 2 screws ‘A’ and allow the plate to drop
down (
Fig. 11.8 ). Undo the terminal and earth
connections, noting their positions. Withdraw the
element.
Replace the element and re-assemble parts in reverse
order.
To replace the cover plate, tilt it up at the back to allow
it to go under the front lip of the oven, making sure that
the fixing holes are aligned at the rear of the cooker.
Lower into position and replace the screws.
4.6 To Remove an Oven Element Thermal Cut-Out
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the cover
box. Undo the cover screws and lift clear. The cut-out
is located on the earth plate beside the oven element
connections. Disconnect the cut-out wiring. Undo the
fixings that secure the cut-out to the earth plate and
remove.
Fit the replacement control and re-assemble in reverse
order.
Fig. 11.7
Fig. 11.8