5
B-5) Panic Mode
Use this mode when you are in a situation where you need to warn away intruders.
a>
With the alarm disarmed, press button (1) for 3 seconds.
The doors will be locked, immobiliser will turn on, hazard lights will flash and siren sound. The
system will be armed after the siren stops.
b> With the alarm armed, press button (1) for 3 seconds.
The hazard lights will flash and the siren will sound. The system will remain armed.
c> With the ignition on, press button (1) for 3 seconds.
The hazard lights will flash and the siren sound. After the ignition is turned off, the immobiliser
will be on and armed.
B-6) Boot Release (optional feature)
Press and hold button (3) for 2 seconds with the system either armed or disarmed and the boot
will be released.
B-7) Car Finder
a>
Press button (3) once while the system is armed or disarmed, the hazard lights will flash 12
times and the siren will chirp 6 times.
b>
During Car Finder mode the system can be armed or disarmed as normal.
B-8) Mute Arm Mode
With the alarm disarmed, Press button (1) and (2) simultaneously, the hazard lights will flash
once, then press button (1) once again within a second. (The LCD Remote Transmitter will
sounds one long chirp and display mute and lock icons).
Note that when the system is mute armed the siren will not sound if the 2
nd
stage shock sensor
or additional sensors are triggered but the hazard lights will flash as normal.
B-9) Remote Valet Mode
This mode is a convenient feature to use when you hand the remote transmitter to third person
for valet parking or vehicle service.
With the system disarmed, switch the ignition on and press button (1) and (2) once
simultaneously, the siren will chirp once and the LED turn on steady and the system will enter
valet mode. In this mode, drivers can control only door lock/unlock.
To exit the remote valet mode, repeat the steps above. The siren will chirp twice and the LED
turns off to confirm leaving valet mode.
B-10) Emergency Override Mode
In the event of an emergency such as losing the remote control transmitters, you can override
the full security system.
a> Open the door with your car key and the alarm will be triggered.
b> Switch the ignition on/off 6 times.
B-11) Shock Sensor Bypass
The 1
st
stage (warn off) shock sensor can be bypassed temporarily by pressing button (1) within
2 seconds of arming.
B-12) Channel 3 Output/Total Closure Output (optional feature)
Channel 3 output is often used to operate an external device or can be configured to operate
Total/Comfort Closure.
B-13) Remote Engine Start for Automatic Transmissions
Press button (4) for over 3 seconds to remote start.
The engine will shut off in the following cases to protect your vehicle after the remote start.
a> Bonnet Open
