Falcon Hybrid, Руководство по установке и эксплуатации

Страница: 25 / 36

The Pima serial interface will send the standard FSK Contact ID
alarm codes.
DSC NEO SERIAL INTERFACE
Set the serial port format to DSC PowerSeries Neo on the Falcon
Hybrid (Refer to Section 3.4). The Falcon GSM can send alarms
received from the PC LINK_2 header of the DSC PowerSeries
Neo panel.
Plug the adapter marked DSC PowerSeries Neo Adapter into the
PC LINK_2 header on the alarm panel. Plug the other end into
the Falcon GSM’s serial port.
Proceed to program the panel as per the Falcon Connection &
App Set-up Guide provided, for alarm signals to be sent and/or
for app connectivity.
DSC POWERSERIES FSK KEY-BUS MODULE
The Falcon Hybrid can send alarms received from the keypad-
bus of the DSC PowerSeries alarm panel.
Wire the DSC PowerSeries FSK Key-bus Module to the keypad-
bus on the alarm panel and then connect the 4-pin molex
connector to the serial port of the Falcon Hybrid.
Proceed to program the panel as per the Falcon Connection &
App Set-up Guide provided, for alarm signals to be sent and/or
for app connectivity.
Falcon Hybrid Installation and Operation Manual I 26