Falcon FN2-4.5K-2TXI, Инструкция по установке и эксплуатации, Страница: 34 / 45

Installation & User Manual Falcon Electric, Inc.
FN2 Series OM480051 Rev.: E
34
If the UPS malfunctions during operation, please check the following:
1. Verify Input / Output wiring.
2. Verify AC Input Source is within UPS acceptable voltage range.
3. If problems persist, reference the following table for possible conditions and solutions
otherwise please contact Falcon Electric, Inc. Service Department.
Error Code Description
Er05
Battery weak or dead
Er06 Output short circuit
Er10 Inverter over-current
Er11 UPS over-temperature
Er12 Severe UPS output overload
Er14
Fan error
Er16 Output parameters set error in parallel system
Er17
ID Numbers are in conflict in Parallel System or ID
number error in single unit
Er21
Parallel communication error (communication wire
disconnected or failure to find ID1 UPS) in Parallel
S t
Er24
CVCF mode with bypass input (Bypass must be
disabled for CVCF mode.)
Er27
The UPS must be operated in normal mode in
Parallel System.
Er28 Bypass overload time out and cut off output
Er33 Isolation transformer is over-temperature
Er**
Other error codes, contact Falcon Service
Department for further assistance.