![background image](http://html1.mh-extra.com/html/falcon/f18/f18_owners-manual_3253542034.webp)
Note if the tag line is lost it is easiest to feed the wire back through the beam using
a short piece of stiff wire. There are many other lines and bungee systems already
installed in the beam, so it works best to try and feed the tack line over the top of
the other systems already strung inside the beam.
22.3 – Tack release:
Locate the assembly labeled “Tack Release”. Feed each end
of the bare spectra line through the grommet holes located on the starboard forward
part of the trampoline.
Tie the stainless steel ring to each side of the line. The length of each line should
be set such that the ring will easily ride against the back face of the front beam just
behind the tack cleat. The 2 lines need to be at the same tension.
22.4 – Attaching the Spin:
Untie the free end of the spin halyard and fasten to the
head of the spin.
Attach the spin tack line, coming out the end of the spin pole, to the tack of the spin.
Untie the opposite end of the spin halyard exiting from the spin hoop, and feed up
the back side of the spin through each of the pull patches in order from lowest to
highest. Tie off the line on the upper patch