Falcon Elise SE 110 Dual Fuel, Руководство пользователя и инструкции по установке

Страница: 28 / 36

INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
24
ArtNo.281-0026 - Front plinth
Fig.7-15
Electrical Connection
The cooker must be installed by a qualified electrician, in
accordance with the relevant national and local regulations.
Note: The cooker must be connected to the correct electrical
supply as stated on the voltage label on the cooker, through
a suitable cooker control unit incorporating a double-pole
switch, having a contact separation of at least 3 mm in all
poles.
n n
The cooker MUST NOT be connected to an ordinary
domestic power point.
Access to the mains terminal is gained by removing the
electrical terminal cover box on the back panel. Connect the
mains cable to the correct terminals for your electrical supply
type
(Fig.7-13)
. Check that the links are correctly fitted and
that the terminal screws are tight. Secure the mains cable
using the cable clamp.
Final Checks
Hotplate Check
Check each burner in turn (refer to the ‘Hotplate Burners’
section at the front of the instructions).
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Turn on the ovens. Check that the oven fans start to turn and
that the ovens start to heat up.
Note:
The oven light bulb is not included in the guarantee.
Turn off the ovens.
Final Fitting
Fitting the Pan Supports
Please note that the outer pan supports are handed, and may
prevent the centre pan supports from fitting correctly. There
is a small indent in the rear of each of the outer supports.
This indent should be towards the outer edge of the cooker
(Fig.7-14)
.
Fitting the Plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (Fig.7-15) .
Customer Care
Installer:
Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
ArtNo.130-0010 Electrical connections single-phase
L
N
230 V ac 50 Hz
10 mm² max
6 mm² max
Fig.7-13
Current Operated Earth Leakage Breakers
The combined use of your cooker and other domestic
appliances may cause nuisance tripping, so we
recommend that the cooker is protected on an individual
RCD (Residual Current Device) or RCBO (Residual Current
Breaker with Overload).
IF IN DOUBT, PLEASE CONSULT A SUITABLY QUALIFIED
ELECTRICIAN.
Fig.7-14