background image

6.

Technical Support

Your FALCON

®

Electric ED Series is backed by one of the finest customer 

service teams assembled. Write, Call, Fax or Email should you require 
technical assistance or service.

FALCON ELECTRIC, INC.

Irwindale, CA. 91706
Voice 626.962.7770
Fax 626.962.7720
Service 800.842.6940
Email: [email protected]
WWW.FALCONUPS.COM

Should service be desired, you must first obtain a Return Material Authorization
number (RMA) and return shipping instructions from our customer service 
department.  Please have your ED model, serial numbers and date of 
purchase on hand prior to  the call.  This information is located on the 
identification label on the rear panel of the unit. This information is essential in 
retrieving your unit's historical records.

The RMA number issued must appear on the outside of the shipping carton. 
The original shipping container must be used when returning any ED 
Series product. Falcon

®

Electric will not assume any responsibility for shipping 

damage. In the event of shipping damage, you will be charged for repairs due 
to the damage.

All units must be returned prepaid.  The address and shipping instructions will 
be given to you at the time the RMA is issued.

7.

Requesting Technical Information or Support.

You may request technical information or support by Email or telephone. 

Please send your technical or support questions by Email to:

[email protected]

You may contact a FALCON support engineer directly by calling the FALCON 
support line between 9:00 am and 4:00 pm PST. 

800-842-6940

8.

FALCON Web Support

Product data sheets, specification and owner’s guides are available in Adobe 
.PDF format on our corporate website.

WWW.FALCONUPS.COM

12

5116 Azusa Canyon Road

Содержание ED3000-A

















Отзывы: