Falcon DAEDALUS, Руководство пользователя, Страница: 3 / 20

1
Welcome to the Flock!
Thank you for purchasing this custom-made Falcon electric spinning
wheel! It was designed to be quiet, long-lived, and to require little
to no maintenance during its lifetime. Falcon is by far the fastest
spinning wheel on the market and specializes in fine gauges. Anyone
who spins production-quantity cotton or silk will be able to benefit
from the high linear feed rates and insane twist rate potential.
Please be careful when operating at high speed! Have a stable and
clean work surface, tie long hair back, and don’t wear long, loose
sleeves. Keep children and pets away from your work area.
Check out all of our YouTube Videos on how to use the Falcon by
scanning this QR Code with your mobile device.
Package contents may shift during shipping,
so let’s make sure that everything is
properly aligned for optimal spinning. This
is also a wise procedure after traveling with
your Daedalus wheel.
The motor mount is designed to be easily
removed for flat-pack. Because of this
feature, you will need to make sure the motor and its pinion pulley are
properly aligned directly underneath the flyer pulley, because it may
have shifted a little during shipping.
Getting Started
Do NOT operate the wheel with a “stalled” bobbin. If you want to
run the wheel and bobbin without actually spinning yarn (just to
see it spin), REMOVE the tension belt first. This will allow the bobbin
to spin along with the flyer, like normal spinning. Operating with a
stalled bobbin can damage and/or prematurely wear the bobbin
bearings, which are optimized for low relative speeds when takeup is
happening.
Warning