17.
Once the front straps have been attached to the windshield move to the rear of the vehicle and attach the
webbing straps with double-sided Velcro to the rear bar between the rear door and the rear window.
First wrap the bar with the adhesive Velcro and then wrap with the double-sided as you did with the
front and rear doors. Two extra straps have been provided for top only usage. See photos below:
18.
Once all straps have been attached to the buckles pull them tight. You may need to loosen and tighten
as you go to ensure that to top is centered. If waves appear across the top diagonally this is usually a
good sign that one corner has been pulled tighter than another.
19.
Lastly, after the top has been pulled tight install the top brace. Take a small knife and poke an x through
the fabric where each hole is located. Now install as shown in the windshield instructions. See photo on
next page:
