8.
To finish off the door attach the 20” adhesive Velcro strip down the rear portion of the door as shown
below. Then attach the door to the Velcro.
9.
Once the door is in place install the rear window. The top of the windshield is held in place by two 8”
Velcro tabs sewn along the edges on both sides of the brake light. Attach the adhesive Velcro strips on
the top bar as shown in the photo below.
10.
Now take the rear window and attach the two 8” tabs to the adhesive Velcro centering the cutout across
the top under the rear brake light. The photo below shows how it should look.
11.
Next attach the four double-sided strips to the roll cage as you did with the door.
