NAVI-1/NAVI-XT VERSION
1.06
When the FALCOM NAVI-1 Bluetooth™ GPS receiver is connected to
handheld device, the Bluetooth™ indicator on the NAVI-1 Bluetooth™
GPS receiver will be steadily on.
5.3.1 Using the Bluetooth™ GPS Receiver
As soon as you have installed and configured the Falcom NAVI-1 on your
mobile equipment (Pocked PCs), the inserting of navigation is anymore in
the way. You have just to run the installed GPS Mapping software. The
Bluetooth™ connection for the installed GPS Mapping software must be set
to the correct COM port (please refer to the user documentation of the
installed GPS Mapping software for instructions). Determine which COM
port number your Bluetooth™ device uses for serial COM port connections
(in our example is COM 7). The FALCOM NAVI-1 communicates to a
Bluetooth™ serial port with following settings:
up to 115200 bps, 8 Data
Bits, NONE parity, 1 Stop Bit
. Depending on the device you use for
Bluetooth™ connectivity, you may or may not need to modify the COM
port setting. If necessary, refer to the user documentation of your
Bluetooth™ device. In order to navigate to your destination, please, refer to
the user documentation of installed GPS Mapping software for instructions.
There you will find exactly explained the methods for setting the destination
and following the navigation instructions to travel to your destination.
We wish you much fun and have a good trip with your FALCOM NAVI-1.
!!
Please remember that:
Safety to traffic has always priority! Please use the FALCOM NAVI-1 only
in such a way that you always keep control of your vehicle in all traffic
conditions.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 31
