FOX3-2G/3G/4G/-4G-PROMOTION-KIT Getting Started
Version 1.0.7
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 8 of 25
3
GETTING STARTED
3.1
PROMOTION-KIT hardware set up
This chapter explains how to connect and set-up the PROMOTION-KIT.
Installing the PROMOTION-KIT in five steps:
1.
Unpack the PROMOTION-KIT.
2.
Connect the FOX3 unit to the control-box, PC and apply power.
3.
Charge the internal battery of the FOX3-2G/3G/4G and power up the device.
4.
Install the FALCOM Workbench software and start the evaluation of the FOX3-2G/3G/4G device
5.
Access the online documentation from the FALCOM website using the login data available in the info
sheet supplied with PROMOTION-KIT.
3.1.1
Unpacking the PROMOTION-KIT
Unpack the contents as shown in the figure below. There are no external antennas included in the
PROMOTION-KIT, as the FOX3-2G/3G/4G has also internal GSM/GPS antennas.
Figure 2:
Boxes inside the PROMOTION-KIT.
Figure 3:
PROMOTION-KIT contents.
