FOX3-2G/3G/4G/-4G-PROMOTION-KIT Getting Started
Version 1.0.7
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 6 of 25
Article name
QTY Description
FOX3-2G/3G/4G (BOX)
FOX3 unit
1
FOX3 or FOX3-3G unit, pre-configured with access to the FALCOM
D2Sphere
server. The device is
placed in the IGN-Sleep mode prior to being shipped from the factory and can be woken up via
IGN-Switch or a high signal on IGN-pin.
Battery
1
1000 mAh rechargeable battery (already inserted and connected to the FOX3-2G/3G/4G/-4G)
PREMIUM-FEATURES -
All PREMIUM-FEATURES are activated by the factory. For details how to use them refer to the
corresponding Application Notes listed in chapter 2.2
SIM-Card
1
Prepaid SIM card. Service fee includes 10MB of data transfer and 3 months access to the FALCOM
D2Sphere
server for evaluation purposes.
ANT-11 /
ANT-12 /
ANT-14 /
1
Depending on which Promotion Kit you ordered, one of the following external antennas will be
part of your kit:
ANT-11 :
Quad Band GSM+GPS combination antenna for FOX3 only.
ANT-12
: Penta Band GSM/WCDMA combination antenna for FOX3-3G.
ANT-14
: GSM/UMTS/WCDMA/LTE and GNSS combined antennas for FOX3-4G.
More details: http://www.falcom.de/products/accessories/antennas/
Instruction sheet
1
Necessary information how to get started with FALCOM AVL devices.
Info-Sheet
1
Contains log-in data to access the online documentation on the FALCOM website and FALCOM
D2Sphere
server for evaluation purposes.
Support
-
8 hours free technical support.
FOX3-2G/3G/4G-CONTROL-BOX
Control-Box
1
To test the functions of the FOX3-2G/3G/4G device and allows connection to your PC for
evaluation purposes.
USB to SERIAL
1
This cable allows a serial connection through the USB port of the PC to the serial port of the control
box.
CA27
1
Main port service and power connection cable
CA31
1
Installation cable for FOX3-2G/3G/4G with interface to the RFID-Reader or JAZZ2. This cable allows
to install your FOX3-2G/3G/4G to the vehicle.
CA69
1
This cable allows testing of the available pins on the accessory port of the FOX3-2G/3G/4G (e.g. 1-
Wire bus). It has a 4pin connector for connecting to a RFID-Reader or JAZZ2 device.
CA76
1
Accessory port service cable with 2x3pin connector to DB9 female socket with a length of 1.0 m
CA123
1
2x4pin connector to OBDII cable with separated IGN-wire. Cable length of 1.5 m
POWER-SUPPLY-BOX
Power Suppy
1
Type
FW7238/12
incl. UK/US/AU/EU adaptor
Table 1
: The list of items included in the PROMOTION-KIT.
2.2
Related documents
In addition to this document, the following files comprise the full set of FOX3-2G/3G/4G product manuals
and can be downloaded from the FALCOM web site (protected area)
Downloading documents from the
FALCOM website:
1.
Open your installed browser and enter
https://www.falcom.de/distributor-login/?origin=4
2.
Log-in using the logging data (Username & Password) available in the Info Sheet delivered with the
PROMOTION-KIT
3.
Go to "
Support
" and select "
AVL (FOX3, STEPPIII,.....)
" from the "
Documentation
" selection box
4.
This will list the supporting documents for all FALCOM AVL devices. Please, download just the
documents listed in the table below.
