Falco AR-60-PYRS, Инструкция по установке и эксплуатации

Страница: 9 / 20

2. Fix the bottom chimney section to the extractor with the 2 screws (4 x
8mm).
3. Slide the chimney sections to adjust the chimney height. Once the
required height is reached, then fix the bracket (plate I) into place with
the 2 x screws provided (4 x 8mm) as shown in the picture below.
4. Drill 2 x 8mm holes to accommodate the plate II. Screw and tighten
plate II onto the wall with the screws provided.
5.
Assemble the chimney onto the extractor and fix it with 2 screws.
9