Falco AR-60-PYRS, Инструкция по установке и эксплуатации

Страница: 7 / 20

4. Lift up the extractor and hang it on the now mounted wall bracket.
5.
Fix the provided ducting pipe to the air outlet of the extractor as in the
picture below:
Fitting the Chimneys for a Curved Glass Extractor:
Slide the top chimney piece (this is the one with the vents holes cut
into the sides) into the bottom section (this one is solid with no vent
holes).
1. Adjust the total chimney length, by sliding the two chimney sections to
the required length. Once the required length is determined, fix the
bracket with the provided screws as shown in the picture below:
Upper Chimney
Bottom Chimney
7