Technical specifications
Amplification: precision 20.0x, fixed
Bandwidth: DC – 100kHz @ -3dB large signal bandwidth
Noise and offset: 50
µ
V
rms
output noise typical without capacitor box, 20
µ
V
rms
with Falco
Systems capacitive load box connected to the output, 700
µ
V offset typical
Output voltage: -175V to +175V
Current: 150mA typical with limiter
Slew rate: 80V/μs typical
Input impedance: 1kΩ // 100pF
Output impedance: 50Ω
Stability: stable with all capacitive and resistive loads, no overshoot > 5%
Power: 230V 50Hz AC, 140W or 115V 60 Hz AC, 140W
Mains fuse: 2x 800mA 250V slow blow (230V version) or 2x 1.6A 250V slow blow (115V
version)
Safety: Class I - requires mains power connector with protective earth
Overvoltage: Category II
Operating temperature: 15 – 30°C
Storage temperature: 0 – 60°C
Relative humidity: 30 – 70% non-condensing
Maximum usage height: 2000m
Dimensions: 52 x 165 x 300mm
Weight: 4.3kg
Country of origin: The Netherlands
Specifications may be subject to change
Harmonized standards
This product complies with the following
standards:
Safety: EN61010-1
EMC: EN61326
FCC: 47 CFR 15
WEEE and RoHS
Do not dispose of the WMA-200 amplifier
as standard waste, but bring it to a WEEE
electronic waste collection point. The
amplifier has been built in compliance with
the RoHS directive.
Warranty
Falco Systems products are guaranteed
against malfunction due to defects in
materials or workmanship for a period of 1
year from the date on the invoice.
If a malfunction occurs during this period,
the product will be repaired or replaced
without charge. The product will be
returned to the customer free of charge.
The warranty does not apply to:
- Exterior finish or appearance.
- Malfunction of the product resulting from
use or operation in other ways than
specified in the user manual.
- Malfunctioning due to misuse or abuse of
the product.
- Malfunctioning occurring after changes or
repairs have been made by anyone other
than Falco Systems.
To obtain warranty service, inform Falco
Systems via
You will receive support and further
instructions. Falco Systems will not be
liable for any consequential damages,
including, without limitation, devices or
equipment connected to the product, injury
to persons or property or loss of use. For
more details see the Falco Systems
Standard Terms and Conditions of Sale,
which can also be downloaded on
www.falco-systems.com
