2. Description
ZWS12 actuators are only for external installation with Fakro roof windows. They are compatible with Fakro
wireless remote controls or other remote controls marked with the Z-Wave logo produced by other companies. actuators
are equipped with a two-way module of radio communication. Z-Wave uses 869 MHz radio waves.
The ZWS motors are equipped with two limit switches:
–
limit switch at maximum chain travel position,
–
overload limit in both directions (used mainly when closing the window).
In order to use the appliance, it is essential to install it in accordance with the figure manual attached to its package.
Programming should be done with any of the remote controls available from Fakro or any remote controls equipped with
the Z-Wave logo produced by other companies.
Figure 1
shows a general view of the ZWS12 actuator with a description
of the buttons and indicators. In the ZWS12 actuator the controlling module is located under the right-side body cover -
see
Figure 1.
02.03.18 NC817-GB 3/8 ©2018, FAKRO
Figure 1: ZWS12 actuator button description.
A
C
B
4
3
2
1
Cable
1. Red button – programming button P
2. Led netork status
3. Black button – manual control button
4. Led motor status
