fakro ZWS12, Руководство пользователя

Страница: 2 / 8

1. Safety standards
Please carefully read the instructions below before installing the actuator to avoid electric
shocks, laceration, etc.

While installing the electric actuator it is essential to comply with the following rules:

Firstly, after unpacking, check that the actuator does not show any signs of mechanical
damage.

Installation should be performed by a qualified person according to the producer’s user
manual.

Before connecting the actuator, make sure that the supporting voltage is compatible with
the voltage of the actuator mentioned on the rated plate.

Connect the actuator and launch one cycle of work to verify whether it works correctly
(dual-core wire - 15V DC).

Plastic containers used for packing should be kept out of children’s reach as they pose a
potential threat.

The actuator should be used only for its purpose. FAKRO is not responsible for any
damage of the actuator resulting from improper use.

Any actions related to cleaning, adjusting or disassembling of the electric actuator should
be preceded by disconnecting the power supply.

Do not use any solvent-like agents, or a water jet (do not dip in water).

All repairs should be made by a service authorized by the producer.

The actuator is for external use only.
02.03.18 NC817-GB 2/8 ©2018, FAKRO