4.3 Device deleting from ZWMP weather module (DELETE function)
This function removes from the module's memory the device which has been associated with a
selected channel. It does not remove the device from the “Z-Wave” network. The procedure of deleting the
device from a given channel is presented in
Figure 5
.
*) Programming error results from failure to receive any reply from the device and may be caused by:
•
failure to press the programming button within 10 seconds from the module signalling its readiness to
delete the device;
•
long distance between the module and device being deleted;
•
the device belonging to network other than module.
11.09.21 NC815
8/16
©2011,
FAKRO
Figure 5: Device deleting from ZWMP module channel
4.
Press “P” button on the device and hold
it for 0.5 sec. (see Device Programming
Manual)
2
. Within 1.5 sec., press:
- “
In/Ex
” button twice and
- “
C
” or “
O
” button, depending on
how the device has been associated.
6*
. Programming error –
LEDs flashing for app. 2-3
sec.).
1
. Using
SEL
button choose a
channel in the ZWMP module,
through which the device to be
deleted is operated.
5
. The module is signaling that the
device has been deleted
successfully (three LEDs on for
app. 2-3 sec.).
3
. The module is signalling
readiness for device deleting
(three LEDs on for 10 sec.).
O
C
Sel
In/Ex
4
3
2
1
O
C
Sel
In/Ex
4
3
2
1
1
x2
2
x1
2
x1
lub
O
C
Sel
In/Ex
4
3
2
1
O
C
Sel
In/Ex
4
3
2
1
O
C
Sel
In/Ex
4
3
2
1
x1
Содержание ZWMP
Страница 13: ...11 09 21 NC815 13 16 2011 FAKRO ...
Страница 14: ...11 09 21 NC815 14 16 2011 FAKRO ...
Страница 15: ...11 09 21 NC815 15 16 2011 FAKRO ...
