fakro AMZ Скачать руководство пользователя страница 16

Страница: 16 / 16

Warranty

The manufacturer guarantees correct device functioning. It also undertakes to repair or replace the device

if damage is a result of material or structural faults. The warranty period is 24 months from the purchase date,

fulfilling the following conditions:

• Installation has been performed by an authorised person, as per manufacturer recommendations.

• Seals remain intact and no unauthorised structural changes have been made.

• The device has been used in accordance with its intended use as per user manual. Damage is not a result of

improperly made electrical system or atmospheric phenomena.

• The manufacturer is not liable for damage which occurred as a result of improper use or mechanical damage.

• In case of failure, the device must be submitted for repair with a Warranty Card. Defects revealed within the

warranty period will be removed free of charge no longer than 1 4 days after accepting the product for repair.

Warranty and post-warranty repairs are performed by the manufacturer i.e. FAKRO PP. Sp. z o.o..

Quality Certificate:

Device

Model............................................................................................................................................

Serial No ......................................................................................................................................

Seller ............................................................................................................................................

Address ........................................................................................................................................

Purchase date ..............................................................................................................................

..............................................................................................................

Signature (stamp) of installing person

Technical parameters

Technical parameters

Parameter

Motor of AMZ Z-Wave

Solar Awning Blind

Power voltage

12V DC

Rated current

1,4 A

Speed

23 r.p.m

Power cable

2 x 0,75 mm

Weight

0,850 kg

Содержание AMZ

















Результаты поиска

Содержание AMZ

Отзывы:

Похожие инструкции для AMZ

Бренды по названию

Популярные бренды

fakro AMZ, Руководство пользователя

Результаты поиска

Содержание AMZ

Отзывы:

Похожие инструкции для AMZ

Бренды по названию

Популярные бренды