Perform the following steps, once
you have finished vacuuming.
Never leave the appliance
unattended.
• Bring the device in an upright
position.
• Wrap power cable around the
cable holder on the handle grip
and on the telescopic tube.
• To open the dust container, pull
out the release button at the
reverse side of the dust container
(fig. 19) that is located at the
reverse side of the device and
take out the dust container. (Fig.
20)
• Take out the filter holder with the
EPA filter, remove the pre-filter
sifter from the dust container (Fig.
21), and properly empty its
content into the container for
non-recyclable waste.
•Also discharge the dirt adhering to
the pre-filter sifter into the
container for non-recyclable
waste.
•Clean the internal sides of the dust
container with a damp cloth.
• Afterwards, re-insert the dust
container (with filters at their
place) accurately fitting into the
housing, until it has audibly
latched into position.
We recommended empting the
dust container after every use.
19
20
21
STARKY PRO
GB
34
WARNING!
Switch the vacuum cleaner off
using the ON/OFF button and
plug out the power cable before
starting any cleaning or servicing.
By doing so, you will prevent
inadvertently switching on the
device.
After vacuuming
Содержание STARKY PRO
