
30
GB
OPERATING
ATTENTION!
We call your attention to proper assembling. The fin (g)
of the insert (3) should be in the same line as the
cutting on the bowl (2) and the cutting in the lid (5).
• Assemble the gasket (14) into the bowl (2) making
sure that the flat surface of the gasket (14) is facing
the top. Align the bowl (2) with the gasket (14) to the
motor (1), so that the juice spout (f) was placed
exactly in the casing (1) groove and 4 buckles from
the upper part of the motor (1) were placed inside the
4 grooves in the bottom of the bowl (2).
• Align the insert (3) to the bowl (2) so that the fin (g) of
the insert (3) is placed in the cutting of the bowl (2)
over the juice spout. Put the filter (4) inside and
check if it is well mounted and rotates easily
• Put the lid (5) so that the fin (g) of the insert (3) was
placed in the cutting of the lid (5)
• Pull the locking bar (6) up, so that the rolls moved
into grooves of the lid (5) from position 2 to position
1( you will hear a characteristic clicking sound).
• Put the bowl for the small fruits (7) on the chute of
the lid (5) when necessary.
• Put the pusher (8) into the chute so that the
V-shaped hole was put on the knife inside the chute.
• Put the pulp collector (12) under the lid (5) in the
following way: lean the collector and place it under
the insert (3 )and lid (5), then push it towards the
motor (1)
• Put the juice collector (9) so that the juice spout (f)
was inside the collector (9).