11
Assembly
en
Place the front protective grille
[2]
with the retaining ring
[3]
precisely onto the retaining ring of the rear protective
grille
[7]
and turn to the right. Make sure that the grille
snaps into place all the way around. Fasten the locking
screw
[8].
Place the cooling fan with the control panel
(motor head)
[10 + 11]
onto the telescopic tube
[14]
and
secure with the knurled screw
[13].
Height adjustment:
The height of the fan can be adjusted.
For adjustment, loosen the cap nut
[15],
pull out or push in
the tube to the desired height and secure again with the
cap nut
[15].
ATTENTION!
If the fan blade is blocked, switch off the cooling fan immediately and dis-
connect it from the power supply. Eliminate the blockage before opera-
ting the cooling fan again.
ATTENTION!
Do not place the appliance directly next to any heat sources and avoid
exposure to direct sunlight. Heat may cause damage to the cooling fan.
Содержание prestige VC 20 S
