Fakir NT 21, Руководство по эксплуатации

Страница: 39 / 48

After use
39
After use
Changing the dust bag /
filters
WARNING!
Before conducting any maintenance or cleaning, switch off and
unplug the appliance. If the mains plug is plugged in, the appli-
ance could accidentally be switched on, resulting in injuries.
•
Release both canister clips and remove motor head from the
canister by means of the carrying handle and set on side.
•
Empty the canister.
•
Replace or clean the filters (as described below).
•
After wet vacuuming, thoroughly dry the interior of the appli-
ance and any wet accessories (nozzles, suction hose, suc-
tion tubes, etc.) and only then install the desired filters.
•
Install motor head on canister and fasten retaining clips.
•
The appliance, accessories and canister should, however, be
cleaned with a moist cloth when required. When doing this,
take care to ensure that no electrical components come into
contact with water.
Filters Filters must be cleaned or replaced at certain intervals in order
to obtain the utmost cleaning efficiency from the appliance.
NOTICE!
Use only original Fakir / nilco filters.
Only in this way can the excellent filter effect of the cleaner be
retained.