Fakir NT 21, Руководство по эксплуатации

Страница: 40 / 48

After use
40
Dust bag
•
Release both canister clips and remove motor head from the
canister by means of the carrying handle and set on side.
•
Take off the textile filter (17).
•
Carefully push the full dust bag sufficiently far back to expose
the socket inside.
•
Now pull the bag upwards out of the canister and dispose of
with the household refuse.
•
Pull the reinforced opening of the new dust bag over the
connecting socket by turning it slightly.
•
Place the ends of the dust bag against the inner wall of the
canister.
•
Reinsert the textile filter (17).
•
Reinstall motor head and fasten the retaining clips.
H.E.P.A. filter Change the H.E.P.A. filter at least after approx. 6 months or if it
is exceptionally dirty.
•
Open the exhaust air grid, remove the old H.E.P.A. filter and
insert the new one.
•
Insert the exhaust air grid again so that it fits precisely.
Motor protection filter /
foam filter
ATTENTION!
Clean or, if necessary, replace the motor protection filter / foam
filter on a regular basis.
•
Release both canister clips and remove motor head from the
canister by means of the carrying handle.
•
Set motor head on the table.
•
Pull the dirty motor protection filter / foam filter carefully off
the float valve housing.
•
The motor protection filter / foam filter can be cleaned in a
warm soapy solution. Then allow to dry thoroughly before re-
installing.
•
Push the cleaned resp. new motor protection filter / foam fil-
ter on the float housing as far as it will go.
•
Reinstall motor head and fasten the retaining clips.
- 22
21 -
19