23
USAGE
GB
Operation as water filtered
vacuum cleaner
• Open the side ratchets and pull the upper body.
• Fill ca. 2 lt water into the waste-water tank.
I
f you do not
use a scale, you could take out the waste-water tank and
fill it under the tap until the landmark on the tank is
reached. Here after put the waste-water tank on top of the
fresh-water tank.
• Put the upper body on the lower body and close the side
ratchets.
• Put the hose connector into the air inlet and turn it right
until it is closed. Take the plug which is next to the
connector, move the power socket lid up and stick the plug
into the power socket.
ATTENTION!
Do not use the appliance without water in the water tank!
ATTENTION!
Fill water until the max. marking!
ATTENTION!
Connect the hose plug only while using the
electrical turbo brush!
