Fakir mars, Инструкция по эксплуатации

Страница: 26 / 36

26
MARS GB
Vacuum Cleaning
Dry vacuum cleaning
Having selected and installed the desired accessory, check
to ensure that the interior of the appliance and the acces-
sories are dry:
• Insert the required nozzle.
• Unwind the mains lead and install the plug in the power
socket.
• Switch on the appliance by lightly pressing the ON/OFF
switch.
• When using the appliance for dry vacuum cleaning,
please make sure that the textile filter (17) is inserted.
Suction controller on the handle of the suction hose
• The suction capacity can also be adjusted with the
suction controller on the handle of the suction hose. Use
this controller (slider) only for short-term reduction of the
suction capacity. With this controller you can reduce the
suction power if e.g. the carpet or mat lifts from the floor
under excessive suction power.
• For normal sucking them but you should keep closed.
• Suction level max. = slide backward vent closed
• Suction level min. = slide forward vent open
Wet vacuum cleaning
• Release both canister clips and remove motor head from
the canister by means of the carrying handle and set on
side.
• Take off the textile filter (17).
• Remove dust bag and check whether the motor protec-
tion filter / foam filter is inserted correctly.
• Put motor head on canister and fasten retaining clips.
• Place the desired accessory and switch on the appliance.
WARNING!
Always check the appliance and the power cable before
use. Faulty appliances may cause injury and should not
be used.
ATTENTION!
Check if all filters have been and the dust bag are
inserted properly resp. are damaged before using the
appliance.