30
MARS
GB
ATTENTION!
Clean or, if necessary, replace the motor protection filter
/ foam filter on a regular basis.
Motor protection filter / foam filter
WARNING!
Before conducting any maintenance or cleaning, switch
off and unplug the appliance. If the mains plug is plugged
in, the appliance could accidentally be switched on,
resulting in injuries.
ATTENTION!
Do not use any cleaning agents, abrasives or alcohol.
These damage the housing.
Cleaning
• Release both canister clips and remove motor head from
the canister by means of the carrying handle.
• Set motor head on the table.
• Pull the dirty motor protection filter / foam filter carefully
off the float valve housing.
• The motor protection filter / foam filter can be cleaned in a
warm soapy solution. Then allow to dry thoroughly before
reinstalling.
• Push the cleaned resp. new motor protection filter / foam
filter on the float housing as far as it will go.
• Reinstall motor head and fasten the retaining clips.
• Clean the appliance dry only or with a moist cloth.
• You can also clean the filter compartment with a moist
cloth, if required.
• Clean and check the vacuum accessories such as hose,
tube, and nozzles for any clogs and wash and dry them if
necessary.
• Should the appliance's performance be unsatisfactory
(reduced suction, unusual noises or failure), check first if
the filters are full or dirty or if the suction paths have
become clogged.
Содержание mars
Страница 1: ...MARS Kullanım Kılavuzu Islak Kuru Elektrik Süpürgesi TR Instruction Manual Dry Wet Vacuum Cleaner GB ...
Страница 33: ...33 NOT NOTES ...
Страница 34: ...34 NOT NOTES ...
Страница 35: ...NOT NOTES 35 ...