7 SAFETY SYSTEM
1- The resistances used in the appliance are sheathed tubular type and the resistance
wire is not in contact with water.
2- Therefore electricity passing through the device does not contact with water any way
and by this way security is provided against electric shock.
3- Thanks to the diaphragm and the flow switch placed in the water inlet of the device,
when there is not sufficient or any water flow to device, resistances are disabled
against potential hazards to provide the security even if the device is on position.
4- The thermostat placed on the heating chamber automatically disconnects the circuit
resistance when output water temperature has reached a level that would harm the
user's health or the operation of the device.
5- When the water temperature drops to a normal level, resistance is activated again.
6- In case of a clogging at the device water outlet for any reason, return system
disables the device to avoid sudden temperature increases.
7- In case of excessive water flow rate rising for any reason, the safety valve on the
heating chamber drain excess water to avoid the harm to user's health or the
operation of the device.
8- By providing water continuously in the heating chamber in which the tubular
resistance is placed, the damage to the plastic parts of the device caused by
possible water shortages is prevented.
9- A warning lamp is placed on the front side of the device in case user forgets the
device on position.
Maintenance
Maintenance of the electrical instant water heater should be made by Fakir Authorized
Services; otherwise, our company is not responsible for problems that may arise.
First of all, bring the switch off that connected to the device to make the electrical
connection discontinued.
Clean the device with an appropriate detergent against calcification that may occur
over time, do not use substances such as solvents that could damage the device.
29
LAGOON
GB
