M-BFS35-45ow.doc
Issue 3225-Aug 01
2
PERFORMANCE
Blade speed
2750rpm
2750rpm
At engine speed of
3600rpm
3600rpm
Max depth of cut
100mm
150mm
BLADE DATA
Maximum diameter: 350mm for the BFS35
450mm for the BFS45
Bore diameter
25.4mm
Guaranteed Sound Power,
108 Lwa
dB(A)
3.
SAFETY PRECAUTIONS AND INFORMATION
Read these operating and safety instructions before using the machine and operate
the machine in accordance with these instructions.
1.
Inspect the machine for damage or improper function
2.
Make sure the blade is securely fitted in the correct position and with the
correct blade clamping flanges.
3.
Before use, visually examine blades for cracks and other damage. Do not use
if damage suspected. Ensure shaft and shaft bearings are not worn.
4.
Before starting the machine make sure the blade is clear of the ground.
5.
Never force the blade into the cut. Ease blade into the cut gently and push
machine forward with a constant force.
6.
Press the stop button to stop the engine. After the engine has stopped turn the
engine switch to off (0).
7.
Do not alter the hole in the blade - this will create an out-of-round condition
resulting in blade wobbling, pounding or cracking which could be hazardous.
8.
Do not move the machine around the site with the engine running.
9.
Before performing any cutting operations, let the tool run for a few seconds
without load. If blade wobble, vibration or unusual noise occurs, stop the tool
immediately. Inspect the blade for damage or incorrect mounting.
10.
Do not use side pressure or grind with the side of the blade.
11.
Ensure that the arrow on the blade corresponds with the direction of rotation of
